Open VTS vehicle tracking software logo

GPS Tracker Command Generator

Create device commands for APN, server IP and port, reporting intervals and supported settings.

← All Tools|GPS Protocol & Testing

Tool Guide

GPS tracker setup: from SMS commands to a server connection

Use the free Open VTS GPS tracker command generator to prepare configuration messages. Find your manufacturer and model, enter your SIM's APN and tracking server details, then review the SMS commands. Exact documented profiles are preferred. When one is unavailable, the tool can use another profile from the same manufacturer, clearly showing its source and unverified model compatibility. Settings depend on the command profile; some devices need manufacturer software. Manual required means that manufacturer has no available command profile.

How to connect a GPS tracker to your server

  1. Choose your exact device model

    Search the manufacturer and model printed on your tracker. An exact documented profile takes priority. Otherwise, the tool selects an available command profile from the same manufacturer. Review the source model and firmware notes, and choose a different manufacturer profile if needed; shared branding does not verify matching SMS syntax.

  2. Enter the SIM and server settings

    Use your SIM provider's APN, your reachable tracking server IP or hostname, and its device listener port. Enter APN credentials or the device's current SMS password only when required by that profile. Complete any manufacturer-tool prerequisites shown above the form.

  3. Generate and review each SMS

    Main contains connection settings; Other contains individual checks, controls and maintenance actions. Check the selected delivery method. Send SMS bodies separately to the device SIM, or submit server command bodies through your authorized tracking platform. Preserve all spaces, separators and final characters. The tool does not transmit commands.

  4. Confirm the device connects

    Read the device's SMS replies and check your tracking server for a connection. An accepted configuration message alone does not prove that mobile data, the server listener or a GPS fix is working. Use the model's status commands to narrow down the next check.

Which GPS tracker settings do I need?

  • APN: your SIM's mobile-data connection

    The APN comes from your SIM provider. The form starts with jionet where an APN field is supported; replace it for another provider or a private SIM plan. Enter an APN username and password only if your provider requires them.

  • Server IP or hostname, and port

    These identify the device listener on your tracking server. Use an address the tracker can reach and the port and TCP/UDP transport expected by that listener. Open VTS defaults are prefilled only for established compatible mappings; otherwise you must supply a verified port.

    Check Open VTS supported devices and listener ports
  • Reporting interval: how often the device sends data

    Where the selected model supports these states and values, running or moving defaults to 10 seconds and stopped or parked defaults to 300 seconds. Some trackers define timers differently. Follow the field labels and profile notes for your model.

  • Timezone: optional when the device supports it

    Supported timezone fields start at UTC zero. Apply a GMT command only when your model documents one. A tracker that already reports UTC does not need an invented timezone-setting command.

GPS tracker offline after configuration?

  • The tracker does not reply to SMS

    Check device power, cellular coverage, SIM activation and SMS service. Confirm the destination SIM number, any authorized-sender restriction and the current device password against the manual. A data-only SIM plan may not support the SMS setup route.

  • SMS works, but the server shows no connection

    Check the SIM's data allowance and APN, then the server address, listener port and transport. Verify that the listener is reachable through your firewall or router. Check Server can help inspect domain DNS and web reachability; verify the GPS device listener separately.

    Check server DNS and web reachability
  • The tracker connects, but no location appears

    Check for a GPS fix outdoors, the reported device identifier, and the protocol and firmware expected by your server. The Open VTS diagnostic tool can inspect incoming TCP packets and acknowledgements. It uses its own temporary endpoint, which you must configure separately before testing.

    Inspect a live GPS device connection
  • You are unsure which protocol the device uses

    Identify the tracking protocol from an actual device packet, then confirm the hardware model and configuration manual. Identifying a wire protocol helps choose a listener, but does not establish the device's SMS commands.

    Identify a GPS device protocol from a packet

Frequently Asked Questions

Will these GPS tracker commands work with my device?

The generator prefers a documented profile for your exact model. If none exists, it uses an available profile from the same manufacturer and identifies the source. You can change that profile where alternatives exist. Trackers sharing a manufacturer or protocol can have different SMS syntax, so borrowed commands remain unverified for your selected model and firmware.

Can I generate GT06 and Teltonika SMS configuration commands?

Yes, for the supported GT06 and Teltonika profiles shown in the selector. Their forms expose the settings documented for that profile, such as APN, server address and port. Select your exact model and check its firmware notes; these command formats are not interchangeable across every device in either family.

What happens if I leave the password empty?

The generator never inserts a factory password or PIN. Models with documented blank authentication use that exact format; the supported Teltonika FMB/FMC/FMM family uses two leading spaces when both SMS credentials are blank. Siwi CRG server commands omit SMS credentials, while its SMS mode requires the current password. Other models requiring authentication will ask for it.

Why does a model say Manual required?

Manual required means no command profile is available for that manufacturer. When another model from the same manufacturer has documented commands, the tool offers those under Manufacturer commands instead. It never borrows a profile from a different manufacturer. Check the selected model's manual and listener compatibility before using a borrowed profile.

Which server ports does Open VTS use by default?

The Open VTS supported-device catalogue lists 7510 for GT06 and 7511 for Teltonika. The generator prefills an Open VTS port only where the selected profile has an established compatible mapping. Your deployment may use a different port. Always use your own server IP or hostname and the port of its matching listener.

Does this tool send commands or save my APN credentials?

Commands are generated locally in your browser. The tool does not send SMS, execute server commands, upgrade firmware, connect to a tracker or save your configuration on the Open VTS server. Use your SMS application or authorized tracking-platform command channel for the selected delivery method.